Function and usage of multi-angle anti-tilt labels
In cargo transportation and warehousing scenarios, many cargoes have strict requirements on the placement angle, such as large precision parts, medical equipment, electronic communication equipment, etc. As a professional multi-angle anti-tilt label, it can provide strong protection for the safe transportation of cargoes.
1. Function
(I) Accurate tilt monitoring
It has excellent tilt monitoring capabilities and can display every 10 degrees. It has three independent indication parts inside, two of which are used to monitor the angle and direction of the cargo tilting to the left or right. For example, when transporting a large computer system, if the vehicle bumps and causes the computer system to tilt, these two parts can accurately determine the tilt angle, even a slight tilt of only 10 degrees can be detected, and clearly display whether it is tilting to the left or right. The other part is specifically responsible for monitoring whether the cargo has completely flipped over, ensuring that the angle change of the cargo can be captured in any situation.
(II) Ensure cargo safety
For those cargoes that must remain upright during transportation and warehousing, it can play a key protective role. Taking refrigeration equipment as an example, once tilted, it may cause refrigeration system failure, affecting the normal operation of the equipment and the refrigeration effect of the goods. Through real-time monitoring, once it is found that the tilt of the goods exceeds the safety range, an alarm can be issued in time to remind relevant personnel to take measures to avoid damage to the goods due to tilting, effectively reducing the risk of damage to the goods during transportation.
(III) Clarify the responsibility for accidents
The label adopts a one-time design and has tamper-proof characteristics. Once the goods tilt and the label is triggered, it cannot be reset. This feature makes it a strong evidence to clarify the responsibility for accidents. After the goods arrive at the destination, if the consignee finds that it has been activated, it can be known for sure that the goods have encountered improper tilt during transportation, thereby clearly defining the responsibility, avoiding disputes among the parties involved in the transportation in the determination of responsibility, and saving time and cost.
(IV) Improve the efficiency of supply chain management
It helps enterprises identify problem links in the supply chain. By collecting and analyzing the label triggering data, enterprises can understand which transportation sections, storage locations or operation links are prone to cargo tilt. For example, if a label is frequently triggered in a particular warehouse, the company can optimize the warehouse's cargo handling process, storage method, etc., thereby improving the product quality assurance level of the entire supply chain from the start to the end.
2. Usage
(I) Preparation before installation
Before installing , you need to ensure that the surface of the cargo packaging is clean, dry and flat. If there is dust, oil or moisture on the surface of the cargo packaging, it may affect the label's sticking effect. For special packaging such as rough wood or thick wax wood containers, spray adhesive may be required to enhance the label's bonding strength. At the same time, prepare auxiliary fixing tools such as nails and screws for emergency use.
(II) Installation process
Take out the from the package and carefully tear off the adhesive label paper on the back. Be careful not to touch the adhesive surface of the label to avoid affecting the stickiness.
Place the with the front side facing up and upright, and stick it in a vertical position at the lower corner of the container. Install it at the lowest position at the bottom as much as possible, so that the label can respond best to the tilt of the cargo. For example, when transporting large glass products, installing the label at the bottom corner of the wooden box can more keenly sense the tilt of the glass products.
If using spray adhesive, spray the adhesive evenly on the corresponding position on the surface of the cargo packaging before sticking the label, and then quickly stick the label. If nails and screws are used for fixing, after the label is affixed, use tools to pass the nails or screws through the fixed holes reserved for the label and fix them on the cargo packaging, but be careful not to damage the internal structure of the label.
After installation, press the center and edge of the label hard to ensure that the label fits firmly with the cargo packaging to prevent it from falling off during transportation.
(III) Precautions for use
It starts working immediately after installation, and no additional debugging or setting operations are required. During the entire transportation and warehousing process, avoid intentional touching or interference with the label to ensure that it monitors the tilt status of the cargo normally.
Once the label is triggered, it shows that the cargo has tilted. At this time, do not try to repair or reset the label. When receiving the goods, the consignee should carefully check the status of . If the tag is found to have been activated, the consignee should conduct a comprehensive inspection of the goods in a timely manner and handle possible damage to the goods according to relevant procedures.